Rebar Shop Drawings and Bar Lists for Concrete Work
Placing drawings, bar lists and bending schedules for footings, walls, slabs, columns and beams, from the structural drawings.
Get a Free Quote
Rebar Shop Drawings show every reinforcing bar by mark, size, length, shape and location so the fabricator can cut and bend it and the crew can place it.
Reinforcing steel drawings turn the structural engineer's notes and sections into bars that can be fabricated and placed. Each bar gets a mark, size, length and bend shape, and the placing drawings show where it goes and how it laps.
Accurate rebar detailing also feeds the estimate: the bar list gives tonnage by size for pricing and ordering.
Placing drawings and bar lists
- Plans, elevations and sections by element: footings, walls, slabs, beams, columns, stairs
- Bar marks, sizes, spacing and cover
- Bending schedule with shapes and dimensions
- Lap splice lengths, development lengths and hooks as shown by the contract documents
- Dowels, corner bars and bars at openings
- Total weight by bar size
Standards referenced
Detailing follows the contract drawings, the specification section for reinforcement and the referenced ACI and CRSI practices. Items the structural drawings leave open go to the engineer as RFIs rather than being assumed.
Where conflicts appear
Common conflicts are congestion at beam-column joints, sleeves and embeds colliding with bars, and cover requirements at edges. We flag them before fabrication. The same takeoff supports concrete estimating and rebar quantity quotes.
Submittal workflow
Drawings are sent for architect and engineer review as a submittal. We revise after comments and track the status of each sheet. See shop drawing services for the overall process.
What you receive
- Placing drawings by element
- Bar bending schedule and bar list
- Tonnage summary by size
- Submittal-ready PDF and DWG
- Revision support
Technical scope and terminology we work with
- Bar marks, sizes, grades and coating
- Lap splices, hooks, development length
- Placing drawings and bending diagrams
- Cover, chairs, bolsters, supports
- ACI, CRSI, ASTM A615
- Submittals, RFIs, approved as noted
Who this service is for
Rebar fabricators, concrete subcontractors, general contractors and suppliers who need placing drawings and bar lists.
How it works
- Send structural drawings, specifications and general notes.
- We confirm scope, sheet count and turnaround.
- We detail and send placing drawings and bar lists for review.
- We revise after engineer comments.
Software, standards and file formats
We use PlanSwift and Bluebeam Revu for digital takeoff and markup, Excel with current local cost data for pricing, Oracle Primavera P6 and Microsoft Project for schedules, and AutoCAD-compatible tools for drawings. Deliverables are Excel and PDF files, plus DWG for drawings.
When to use this service
Use rebar shop drawings when a bid date is close, when your team is stretched across projects, when you need an independent check of your own numbers or drawings, or when you want consistent deliverables in the same format every time. Tell us the due date when you request a quote so the schedule can be planned around it.
Engagement options
- One project: order rebar shop drawings for a single bid or job and receive a firm price and turnaround before we start.
- Several trades or divisions: combine this service with related scopes so quantities, drawings and pricing agree.
- Bid-season capacity: send multiple projects with their due dates and we schedule the work to hit each one.
- Ongoing support: repeat-volume contractors can agree standard formats, cost codes and turnaround so every delivery drops straight into their process.
Quality control, confidentiality and communication
Every deliverable is reviewed by a second team member before it reaches you, and assumptions, inclusions and exclusions are written down so they can be checked. If information is missing we send a short list of questions rather than guessing, and we tell you which assumption we used when a question cannot be answered in time. Your plans, specifications and files are used only to prepare your project work and are not shared publicly; see our privacy policy.
Related services, guides and pages
Frequently asked questions
What are rebar shop drawings?
+
They are detailed drawings and bar lists showing each reinforcing bar's mark, size, length, shape and placement, prepared from the structural drawings.
Do you provide rebar takeoff?
+
Yes. The bar list gives tonnage by size, and we can deliver a takeoff only if you do not need full detailing.
Do you detail from PDFs?
+
Yes, from PDF or DWG structural drawings.
Who approves the drawings?
+
The architect and structural engineer review them as a submittal under the contract.
Bid Sharp at a glance: 3 steps, 50 states
Bid Sharp prepares construction estimates, takeoffs, shop drawings, structural and permit drawings and schedules for contractors and homeowners in all 50 states, on public and private projects. Typical turnaround is about 48 hours; the turnaround and a firm price are confirmed before any work starts.
- 1. Upload plans. Send PDF, DWG or a plan-room link with your bid due date.
- 2. Get a firm quote. Scope, price and turnaround in writing, with no obligation.
- 3. Receive deliverables. Excel and PDF files, plus DWG for drawings, checked by 2 team members.
Standards and official sources
Rules, wage rates, codes and procurement procedures change and differ by agency. Confirm the requirements that apply to your project with these primary sources and with the solicitation itself.
Keep exploring
Last updated by the Bid Sharp estimating team.